Product details
The QD-400A and QD-400B small copper wire recycling machines developed by us at the earliest stage have been discontinued due to large losses during use. QD-400S copper wire recycling machine has been improved on their basis, and currently has the same performance as QD-600S, low noise, low loss, and high separation rate. Just because its output is relatively small, only 200-400 kg/h, domestic and foreign customers rarely choose it.
QD-400S copper cable recycling machine can not only process various waste wires and cables, such as the car cables, Ethernet wires,etc. but also many other kinds of scrap wastes, like the small radiators, small transformers, the connectors, and hardware made of copper and plastics, etc.
If you get one QD-400S copper wire granulator, you could get a good profit from recycling waste cables and wires, you will have less problems with the maintenance,too.
QD-400S COPPER WIRE GRANULATOR | |
Capacity: |
200-400 KGS PER HOUR |
Floor Area (L*W*H): |
5.5m*4m*2.2m |
Power: |
32KW |
Weight: |
3060KGS |
Generally one set of QD-400S copper wire recycling machine contains one main crusher, one air separator, two vibration tables. Cause of its small capacity, it usually carries no conveyor, which is not necessary and could lower a bit cost.
If the wires and cables have much iron mixed, we could provide u the double-layer magnets which are placed under the copper outlet of the air separator and above the copper vibration table. They could help get rid of the iron, and make the copper much purer.
Regarding the tinned copper and the copper mixture, all the copper wire recycling machines can’t separate them, cause the densities of the tinned copper and copper are almost the same. And it definitely can’t use the magnets to separate. But their colors are different, tinned copper is silver, copper is gold, color separator may be a good choice.
And all the copper wire recycling machines can’t separate the copper from oil-filled wires and cables, either.
About the separation rate, it could be up to 99% at least, if the single copper conductor is bigger than 0.2mm; It could reach up to 98%, if the single copper conductor is smaller than 0.2mm, but up to 99% at least if with an electrostatic separator.
http://www.chinatzqida.com/
